CRC COLOURED ZINC
Description
CRC Coloured Zinc’s unique formulation combines superior rust inhibiting properties of zinc with a tough but flexible enamel coating and a coloured satin finish in recognised safety colours.
High levels of anti-corrosive zinc complexes are embedded in a resin system which forms a quick-drying highly-protective enamel coating with excellent adhesion to bare metal.
CRC Coloured Zinc provides a satin top-coat finish but unlike standard paint systems, resists undercutting and blistering from corrosion by forming an effective corrosion barrier.
For ultimate protection, prime the metal surface with CRC Zinc It prior to applying CRC Coloured Zinc. To achieve a high film build, use CRC Prep It as an intermediate coat if required.
Ongoing protection can be achieved through simple re-coating after 3 years, depending on conditions. Protection in extreme conditions may require re-application more frequently.
Features & Benefits
Zinc enriched for corrosion protection – High levels of anti-corrosive zinc complexes in the dried film, embedded in a protective enamel coating
Satin finish – Available in seven colours
Safety – Colours conform to British Safety Colour standards
Excellent adhesive qualities – Forms a tough coat for long-term protection
Heat Resistance – Up to 120°C
Corrosion protection – Corrosion Protection Factor 36 (up to 3 years before recoating is necessary, depending on conditions)
Fast drying – Touch dry in 20 minutes, recoat within 30 minutes, full cure in 24 hours
Easy re-application over existing film and/or clean surfaces – For ongoing protection
Single coat – No overcoating required. For additional protection, prime metal surface with CRC Zinc It or CRC Prep It prior to applying CRC Coloured Zinc
Ready to Use Aerosol – No additional mixing or chemical additives required. Easy application. No clean up
Does not contain CFCs, methylene chloride
MPI Approved C23
Uses
Protection + finish in one application – Where a coloured finish is required
Safety – Marking of safety equipment locations, physical hazards and protective equipment in recognised safety colours
Structural steel or frames – Welded seams, spot welding repairs, rivet holes, signs and signposts, pipes, roofs
Electrical – Transformers, transmission towers, earth pegs
Farm equipment – Water tanks, tank stands, fences, gates, animal raceways in milking sheds and yards, farm implements and tractor draw bars, metal junction, terminal boxes, pump equipment, corrugated metal buildings
Boats and boat trailers – Shackles, winches, draw bars, subframes, wheel and guards
Car or caravan – Inner door panels, tow bars, exhaust tail pipes and wheel protection under hub caps
Perfect touch-up – For galvanised products which have been cut, drilled or welded
At home – On iron railings, roofing and spouting, gutters, plumbing, ducting, radio and TV aerials, outdoor fixtures, hinges, fences and gates, wrought iron, air conditioning and refrigeration units
Industrial – Equipment and machinery, machine housings
Roading and Construction – Bridges, guard rails, lamp stands
Wherever iron or steel needs protection and a coloured satin finish is required
